All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
WhatsApp :
+8615665870097
Pre treatment gasification sampler for liquid hydrocarbon analysis SH201
| MODEL: | SH201 |
|---|---|
| Power Supply: | 220V ± 10%, 50Hz ± 1Hz. |
| Operating Environment: | Temperature 5 ℃ - 35 ℃ |
The jet fuel silver strip corrosion tester can perform four sets of experiments simultaneously.
| MODEL: | SH0023 |
|---|---|
| Power Supply: | AC(220±10%)V, 50 Hz |
| Temperature Sensor: | RTD, Pt100 |
Induction Period Method ASTM D525 Automatic Oxidation Stability Bath of Gasoline SH8018
| MODEL: | SH8018 |
|---|---|
| Working Power Supply: | AC220V± 5%, 50Hz. |
| Heating Tube Power: | 1800W |
Actual resin tester (steam jet method) metal bath heating system 3 independent test holes
| MODEL: | SH8019B |
|---|---|
| Working Power Supply: | AC220V±10%, 50Hz, 2.5KW. |
| The Test Hole Size: | Φ 51mm×70mm. |
ASTM D 942 Fully automatic grease oxidation stability tester 2-hole automatic recording SH0325B
| MODEL: | SH0325B |
|---|---|
| Heating Power: | 1500W |
| Temperature Control Point: | 99℃ |
ST001E Full automatic colorimeter blue light diffuse reflection factor method
| MODEL: | ST001E |
|---|---|
| Input Voltage: | AC220V±10% 50HZ |
| Stability Of Measured Values: | ≤ 0.1 Within 30 Minutes |
SH406B Crystallization Point Tester 85% Chemical Analysis Instruments ASTM D852 ASTM D6875 Chemical Analysis Instruments
| MODEL: | SH406B |
|---|---|
| Working Power Supply: | AC220V ± 10%; 50Hz. |
| Temperature Control Of Cold Bath: | + 80 ℃ ～ -10 ℃ |
Chemical reagent - Determination of crystallization point - SH406 plasticizer crystallization point analyzer
| Name: | Plasticizer Crystallization Point Meter/tester |
|---|---|
| Cold Tank Temperature Control: | +80℃ ~ -10℃. |
| Temperature Control Accuracy: | ±0.1℃ |
ASTM D2274 Oil Analysis Testing Equipment Distillate Fuel Oils Oxidation Stability Tester ( accelerated method )
| MODEL: | SH0175B |
|---|---|
| Power Supply: | AC 220 V±10%, 50 Hz |
| Heating Power: | ≤3.4KW |
The industrial aromatic copper strip corrosion tester complies with the heating method of ASTM849 oil bath
| MODEL: | SH11138 |
|---|---|
| Applicable Standard: | ASTM D849 GB/T11138 |
| Temperature Control Accuracy: | ±0.1℃ |