All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
WhatsApp :
+8615665870097
ASTM D93 ABC Step Conversion of the New National Standard Fully Automatic Closed Flash Point Tester SH105BS
MODEL: | SH105BS |
---|---|
Working Power Supply: | AC220V±10%, 50Hz |
Step A: | Heating Rate: 5 ~ 6℃/min |
Automatic calculation results of SH101C automatic mechanical impurity content analyzer (with balance)
MODEL: | SH101C |
---|---|
Temperature: | 4-way PID Temperature Control |
Temperature Control Range: | Room Temperature~100 ℃ |
Mechanical impurity content detection of lubricating oils and additives SH101 gravimetric method
MODEL: | SH101 |
---|---|
Power: | AC220V±10% 50Hz |
Temperature Control Accuracy: | ≤± 1 ℃. |
ASTM D1120 Engine coolant boiling point tester Heating mantle heating tap water circulating cooling
MODEL: | SH0089 |
---|---|
Applicable Standards: | ASTM D1120, SH/T0089 Or SH/T0430 |
Heating Mode: | Electric Heating-jacket |
ASTM D 1384 Engine Coolant Corrosion Tester With 3 Holes Electric heating plate with built-in silent air compressor
MODEL: | SH0085B |
---|---|
Temperature Control Range: | Room Temperature+100 ℃ ± 0.1 ℃ |
Air Flow Meter: Flow Range: | 30~300ml/min |
ASTMD1384 Engine coolant corrosion tester with water bath heating and built-in silent air compressor with three holes
MODEL: | SH0085 |
---|---|
Power: | AC220V±10% 50Hz |
The Power Consumption Of The Whole Machine: | Not More Than 2000W |
ASTM D3241Four hole temperature control accuracy of jet fuel silver strip corrosion tester: ± 0.5 ℃
MODEL: | SH0023 |
---|---|
Power Supply: | AC(220±10%)V, 50 Hz |
Work Rate: | 1500W |
Lubricating grease (Vaseline) cone penetration test SH017 full-automatic constant temperature cone penetration tester
MODEL: | SH017 |
---|---|
Measurement Range: | 0-680 Cone Penetration |
Resolution: | 0.01 Mm |
SD8929B Crude oil moisture meter manual distillation method receiver 5ml
MODEL: | SD8929B |
---|---|
Input Power: | AC220V, 50Hz, ± 10% |
Electric Furnace Heating Power: | 1000W |
China Supplier Oil Lab Testing Equipment ASTM D1500 Oil Colorimeter / Lab Oil Color Tester for Petroleum Products SD6540
MODEL: | SD6540 |
---|---|
Power Supply: | 220V 50Hz |
Color Dial: | 26 Pieces Of 14 Light Holes |