All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
Phone Number :
+8615665870097
WhatsApp :
+8613805402265
50g Sample Micro Plant Pulverizer Grain And Herb Crushing Speed 1400r/Min ST112A
| Maximum Sample Size: | ≤50 G |
|---|---|
| Crushing Mesh Number: | 0.5mm, 1.0mm, 1.5mm Mesh |
| Motor Speed: | 1400 R/min |
Automatic LCD Lovibond Colorimeter RGB Method Stability ≤ 0.2/10min ST110B
| Indication Error: | ≤ 5% |
|---|---|
| Indication Repeatability: | ≤± 0.2 |
| Stability: | ≤ 0.2/10min |
Manual Operation Lovibond Colorimeter Colorimetry Of Edible Oil GB/T 22460-2008
| Red: | 0.1~79.9 Lovibond Unit |
|---|---|
| Yellow: | 0.1~79.9 Lovibond Unit |
| Blue: | 0.1~49.9 Lovibond Unit |
Granular Activated Carbon Strength Tester Preset Time 5min Solid Steel Balls GB/T 7702.3
| Drum Speed: | 50r/min ± 2r/min |
|---|---|
| Steel Ball Diameter: | φ14.3mm±0.2mm |
| Inner Diameter Of Drum: | φ80mm±0.2mm |
0.093Mpa Carbon Dioxide Adsorption Rate Meter control range 1.0℃～99.9℃ LYT 1971-2011
| Vacuum Degree: | 0.093Mpa |
|---|---|
| Gas Flow Rate: | (1670 ± 70) Ml/min |
| Temp Control Accuracy: | 25℃ ± 0.1℃ |
Activated Carbon Tetrachloride Desorption Rate Meter 6 Samples LCD GB/T7702.19
| Display Method: | LCD Screen Display |
|---|---|
| Temp Control Method: | Fully Automatic Heating |
| Carbon Layer Height: | (10 ± 0.2) Cm |
6 Sample Activated Carbon Tetrachloride Adsorption Rate Tester range 1℃ - 99.9℃ ASTMD 3467
| Display Method: | LCD Screen Display |
|---|---|
| Cooling Method: | Compressor Cooling |
| Sample Quantity: | 6 |
Activated Carbon Penetration Sulfur Capacity Tester range 0-10% temp 500-1150℃ GB/T7702.14
| Measurement Range Of Total Sulfur: | 0-10% |
|---|---|
| Combustion Analysis Time: | 3-8 Min |
| Temp Control: | 500-1150℃ |
Activated Carbon Saturation Sulfur Capacity Tester 5mm carbon layer GB/T7702.14
| Water Bath Temperature: | 20-25 ℃ |
|---|---|
| Refrigeration Method: | Compressor Refrigeration |
| Gas Relative Humidity: | 90% ± 5% |
Automatic activated carbon ignition point tester RT ～ 800 ℃ Touch screen ASTM D3466
| Temp Measurement Range: | RT ～ 800 ℃ |
|---|---|
| Temp Resolution: | 1 ℃ |
| Heating Rate: | ＜150 ℃, Approximately 10 ℃/min; ＞150℃，2℃-3℃/min |