|The Measurement Range:||0 ~ 700 Taper (digital Display Table Display 0-70mm);||Cone Time Control Device:||The Time Can Be Set According To Their Own Needs, The Time Error Is Less Than ±0.1 Seconds;|
|Resolution:||0.01㎜;||Needle Precision:||±1 Taper Penetration|
|Temperature Range:||10 ~ 50 Degrees (with Semiconductor Cold Cycle Device, Heating Or Refrigeration);|
Pharmacopoeia Cone In Meter,
0983 Cone In Meter,
Pharmacopoeia cone flow meter
Manual pharmacopoeia cone-in meter 2020 Pharmacopoeia 0983 Cone-in determination method
ST211A Manual pharmacopoeia cone into the tester is based on the 2020 pharmacopoeia 0983 cone into the determination of the technical requirements of the law of and the relevant provisions of the design and manufacturing, the main applicable Yu Run is suitable for the soft cream, eye cream and commonly used matrix materials (such as vaseline, lanolin, wax) semisolid material, such as to control their hardness and properties such as viscosity, Avoid affecting drug coating ductility.
First, the main technical characteristics
1, the use of digital display to display the conical value, intuitive and eye-catching.
2, with lifting frame coarse adjustment, fine adjustment function, easy adjustment, accurate needle.
3, equipped with heating and refrigeration constant temperature bath, water bath temperature automatic control, cost-effective instrument.
Main technical parameters and indicators
1, the measurement range: 0 ~ 700 taper (digital display table display 0-70mm);
2, cone time control device: the time can be set according to their own needs, the time error is less than ±0.1 seconds;
3, resolution 0.01㎜;
4, needle precision: ±1 taper penetration;
5, temperature range: 10 ~ 50 degrees (with semiconductor cold cycle device, heating or refrigeration);
6, temperature control accuracy: 25±0.1℃;
7, temperature control mode: high precision digital temperature controller, can be constant temperature to the standard requirements of 25 degrees;
8. Standard cone: 102.5±0.05g, in line with the 2020 Pharmacopoeia;
9, lifting support: coarse adjustment, fine adjustment of double lifting adjustment mechanism, easy to pinpoint the sample plane;
10, others: equipped with cold light source, easy to use and operation.
Standard cone: No. 1 cone: No. ⅰ cone mass is 102.5g±0.05g, matching cone rod mass is 47.5g±0.05g;
No.2 cone: the mass of no.2 cone is 22.5g±0.025g, and the mass of matching cone rod is 15g±0.025g (optional)
No.3 cone: The total mass of no. ⅲ cone and cone rod is 9.38g±0.025g (optional)
Conical penetration meter: 280mm*350mm*480mm Constant temperature bath: 350mm*320mm*120mm
Shandong Shengtai Instruments Co., Ltd. is specialized in the research and production of experimental testing instruments and industrial testing instruments. It is a professional instrument company integrating instrument research and development, manufacturing, sales and service. Its products are widely used in food, flour, grain and oil, Feed, electricity, petrochemical, industrial oil, aerospace, coal quality and other industries.
For more than 10 years, Shengtai has always been adhering to the "first-class service, customer first" as the purpose, "reasonable price, honesty and trustworthiness" as the business policy. Adhere to technical innovation, with rich knowledge of the technical team and experienced, thoughtful after-sales service team.
Shengtai instrument as one of the most large-scale and competitive enterprises in the industry, with the strength of technology research and development, professional technical knowledge and innovative design concept, in the model improvement, Significant technical breakthrough has been achieved in the development of function expansion and intelligent control system.
After-sales service commitment, our company to sell the product after-sales service commitment: warranty period of one year, long-term technical support outside the warranty period. During the warranty period, the seller shall bear the cost of the replacement of the equipment, the freight and maintenance of the instrument; outside the warranty period, the seller shall waive the maintenance fee and charge only the cost of the basic materials and freight charges when the instrument is malfunctioning and the seller shall not charge the maintenance fee during the warranty period.
Packaging & Delivery
1. Out packing:Standard export wooden case.
2. Inner packing:With careful stretch film wrap product, hard wood board+ strong bandage to fix corners.
3. Checking teams: Specialized staff to inspect and classified your goods.
4.Port Any port of China
Lead Time :
|Quantity(Sets)||1 - 1||2 - 5||6 - 10||>10|
|Est. Time(days)||6||20||30||To be negotiated|
Contact Person: Tang