All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
Phone Number :
+8613220512573
WhatsAPP :
+8613220512573
Lubricating Grease Shear Testing Machine Motor 1400rpm Shear Rate 60 Times/Min ASTM D217
| Motor: | Horizontal Single-phase Capacitor Starting |
|---|---|
| Motor Speed: | 1400 RPM |
| Shear Rate: | 60 Times/min |
Fully Automatic Water-Soluble Acid Tester PH3.8 ～ 7.0 Colorimetric Method ASTM D2599
| Test Range: | PH3.8 ～ 7.0 |
|---|---|
| Measurement Error: | ≤±0.05 PH |
| Repetitiveness: | ≤ 0.05 PH |
Single Hole Solidifying Point Pour Point Cold Filter Point Tester 7-Inch LCD ASTM D97
| Refrigeration Method: | Fully Enclosed High-efficiency Refrigeration Compressor |
|---|---|
| Test Cold Trap: | 1 |
| Temp Range: | +30℃ ～ -70℃ |
Solidifying Point Cold Filter Point Tester -70 ～ 30 ℃ PT100 Sensor Single Hole ASTMD 6371
| Temp Measurement Range: | -70 ～ 30 ℃ |
|---|---|
| Resolution: | 0.1℃ |
| Pressure Measurement Range: | 0-200.0KPa |
Automatic Cold Filter Point Tester -70 ～ 30℃ PT100 Sensor Air Cooling ASTMD 6371
| Temp Measurement Range: | -70 ～ 30℃ |
|---|---|
| Resolution: | 0.1℃ |
| Pressure Measurement Range: | 0 ～ 200.0KPa |
2 Holes Automatic Cold Filter Point Tester -70～30℃ PT100 Sensor Air Cooling ASTM D 6371
| Temp Measurement Range: | -70 ～ 30℃ |
|---|---|
| Accuracy: | 0.1℃ |
| Pressure Measurement Range: | 0 ～ 200.0KPa |
Liquefied Petroleum Gas Density Meter Speed 1250r/Min Pressure Densimeter Method ASTM D1657
| Stirring Motor Power: | 15W |
|---|---|
| Stirring Motor Speed: | 1250r/min |
| Heating Power: | 1000W |
Quench Oil Cooling Performance Tester RT ～ 900 ℃ Silver Probe Automatic Lifting ISO 9550
| Heating Method: | PID Self-tuning, Automatic Adjustment |
|---|---|
| Temperature Range: | RT ～ 900 ℃ |
| Furnace Cavity Size: | Greater Than Φ 25 * 200mm |
Hydraulic Oil Filtration Tester 0 ～ 80℃ Timing 0 ～ 999h PT100 Sensor SH/T 0210
| Temp Range: | 0 ～ 80℃ |
|---|---|
| Absorption Mode: | Vacuum Pump |
| Working Pressure: | 86658Pa |
6 Holes Hydraulic Oil Thermal Stability Tester RT ～ 200℃ A1-3 Aluminum Ingot ASTM D2070
| Temp Control Range: | RT ～ 200℃ |
|---|---|
| Temp Control Accuracy: | ±1℃ |
| Test Unit: | 6 Holes |