All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
Phone Number :
+8613220512573
WhatsAPP :
+8613220512573
Transformer Oil Low Temp Closed Flash Point Tester 0 ～ +350℃ Compressor Refrigeration ASTM D93
| Flash Point Detection Range: | 0 ～ +350℃ |
|---|---|
| Temp Control Accuracy: | ± 0.1℃ |
| Ignition Device: | Electronic Ignition Point, No Gas Source Required |
ASTM D93 Closed Cup Flash Point Tester For Diesel Fuel RT ～ 390℃ StepB Stirring 250±10rpm
| Temp Measurement Range: | RT ～ 390℃ |
|---|---|
| Accuracy: | ≥104℃, ±2℃; ≤104℃, ±1℃ |
| Resolution: | 0.1℃ |
Crude Oil Automatic Closed Cup Flash Point Tester RT ～ 370℃ Electronic Ignition ASTM D93
| Temp Measurement Range: | RT ～ 370℃ |
|---|---|
| Accuracy: | ≥ 104℃, ± 2℃; ≤ 104℃,± 1℃ |
| Resolution: | 0.1℃ |
Lithium Grease Micro Moisture Analyzer Measure 3μg～100mg Karl-Fischer Mode ASTM D6304
| Titration Method: | Electrometric Titration |
|---|---|
| Electrolytic Current: | 0～400mA |
| Measuring Range: | 3μg～100mg（water） |
Gear Oil Automatic Trace Moisture Meter Electrolytic Current 0 ～ 400mA ASTM D6304
| Measurement Range: | 0.00001% ～ 100% Or 0.1ppm ～ One Million Ppm |
|---|---|
| Measurement Accuracy: | When The Water Volume Is Between 10ug And 1000ug, The Error Is Less Than ± 3ug; When The Water Volume Is Greater Than 1000ug, The Error Is Less Than ± 0.3% |
| Resolution: | 0.1ug |
Crude Oil Trace Moisture Meter Measure 0.00001% ～ 100% Karl-Fischer Method ASTM D6304
| Display Mode: | Color Touch Screen Display |
|---|---|
| Measurement Range: | 0.00001% ～ 100% Or 0.1ppm ～ One Million Ppm (1ppm=0.0001%) |
| Resolution: | 0.1ug |
Crude Oil Semi-Automatic Density Tester 0 ～ 100℃ USB Drive Output ASTM D1298
| Temp Measurement Range: | 0 ～ 100℃ Or (customized -60℃ ～ 80℃) |
|---|---|
| Temp Control: | 0.1℃ |
| Test Tube Capacity: | 500ml |
Gear Oil Fully Automatic Constant Temp Density Meter 0.0001～1.999g/Cm³ ASTM D4052
| Measurement Range Of Density: | 0.0001～1.999g/cm³ |
|---|---|
| Density Measurement Accuracy: | ±0.0005g/cm³ |
| Density Value Resolution: | ±0.0005g/cm³ |
Dual Holes Semi-Automatic Crude Oil Density Meter PT100 Sensor RT ～80℃ ASTM D1298
| Number Of Measurement Holes: | 2 Holes |
|---|---|
| Bathtub Capacity: | Ф250 * 300mm |
| Test Tube Capacity: | 500ml |
2 Holes Density Tester Of Crude And Liquid Petroleum Products RT ～ 80℃ ASTM D1298
| Bathtub Capacity: | Ø250 × 300mm |
|---|---|
| Test Tube Capacity: | 500ml |
| Temp Control Range: | RT ～ 80℃ Or 5℃ ～ 100℃ For Cooling |