All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
Phone Number :
+8615665870097
WhatsApp :
+8613805402265
Transformer Oil Fully Automatic Acidity Analyzer ASTM D974 Range 0.001~2.0 MgKOH/G
| Method Used: | Reflux Method (fully Comply With National Standards) |
|---|---|
| Display: | 7-inch LCD Touch Screen |
| Measurement Range: | 0.001~2.0 MgKOH/g |
3 Oil Samples Transformer Oleic Acid Value Tester ASTM D974 Measure 7min Power 300W
| Measurement Method: | Titration Neutralization Method |
|---|---|
| Measurement Time: | 7 Minutes |
| Samples: | 1-3 Oil Samples |
Automatic Residual Carbon Analyzer Astm D4530 Micro Method 0.10%M/M-30.0%M/M
| Measurement Range: | 0.10% (m/m) -30.0% (m/m) |
|---|---|
| Temp Range: | Room Temp -500 ℃ |
| Set Time Error: | <0.1s |
Fully Automatic Open Flash Point And Ignition Point Tester ASTMD92 Accuracy 0.5%
| Temp Measurement Range: | Room Temp ～ 400 ℃ |
|---|---|
| Repeatability: | Flash Point ≤ 150 ℃, Error ± 2 ℃; Flash Point ≥ 150 ℃, Error ± 3 ℃ |
| Resolution: | 0.1 ℃ |
Fully Automatic Cleveland Open Flash Point Tester ASTMD92 Lubricating Oil Rt ～ 400 ℃
| Repeatability: | Flash Point ≤ 150 ℃, Error ± 2 ℃ Flash Point ≥ 150 ℃, Error ± 3 ℃ |
|---|---|
| Resolution: | 0.1 ℃ |
| Heating Rate: | Compliant With GB/T3536 Standard |
Automatic Interface Tension Meter IS0 6295 Platinum Ring Method Range 2-200mN/M
| Measurement Range: | 2-200mN/m |
|---|---|
| Movement Speed: | Fast: 1mm/S Slow Speed: 0.3-0.4mm/S |
| Sensitive Valve: | 0.1mN/m |
Fully Automatic Four Hole Kinematic Viscometer ASTM D445 Light Colored Petroleum
| Material Of Viscosity Tube Fixture: | 304 Stainless Steel |
|---|---|
| Bath Volume: | 14L |
| Number Of Experimental Holes: | 2 Holes On Each Side |
Automatic Low Temp Density Viscometer 2 Holes PT100 Platinum Resistor ASTM D445
| Stopwatch Timing: | 0.05s ～ 99min99.99s |
|---|---|
| Density Test Tube Capacity: | 500ml |
| Temp Control Range: | 0 ℃ ～ 100 ℃ |
Fully Automatic Pinker Motion Viscometer ASTM D445 Light Fuel Oil Rt+5 ℃ ～ 100.0 ℃
| Heating Rate: | >5 ℃/min |
|---|---|
| Temp Control Range: | Room Temp+5 ℃ ～ 100.0 ℃ |
| Temp Control Accuracy: | ± 0.1 ℃ |
2 Semples Petroleum Cold Filter Point Tester ASTM D6371 Range Room Temp To -70 ℃
| Temp Control Range: | Room Temp To -70 ℃ |
|---|---|
| Sample: | 2 Sets |
| Cold Filter Point Measurement Range: | Room Temp ～ -55 ℃ |