All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
Phone Number :
+8613220512573
WhatsAPP :
+8613220512573
Fuel Oil Pour Point Analyzer Pour Point RT ～-25℃ Manual Tilt 90° LCD Display ASTM D97
Product Details
| Cold Bath Temp Control | RT ～-40℃ | Pour Point Range | RT ～-25℃ |
|---|---|---|---|
| Refrigeration System | New Refrigeration Compressor | Instrument Size | 380*480*580mm |
| Power Consumption | No More Than 1000W | Working Power Supply | AC220V ± 10% 50Hz |
| Highlight | Pour Point Analyzer ASTM D97,Manual Tilt 90° Pour Point Tester,LCD Display Freezing Point Tester |
||
Product Description
SD510-Q Petroleum pour point tester
Fuel oil pour point analyzer pour point RT ～-25℃ Manual tilt 90° LCD display ASTM D97
Standard: GB/T 3535 ASTM D97 ISO 3016
SD510-Q The pour point meter is designed and manufactured in accordance with the requirements of the People's Republic of China standard GB/T3535, and is suitable for measuring the pour point of sample products according to the methods specified in the above standards.
Pour point refers to the minimum temperature at which a cooled sample of oil can flow under specified test conditions; Expressed in degrees Celsius.
| Compliance standards | GB/T 3535 ASTM D97 |
| Test sample | Petroleum Products Chemical Products |
| Detection result | Determination of the pour point of petroleum products |
| Product model | SD510-Q |
Performance characteristics
● The instrument adopts a compressor for refrigeration, with fast cooling speed and long service life.
● The display mode adopts small liquid crystal display, with good temperature control stability.
● Two sets of tests can be conducted simultaneously, with a single slot and two holes, and the cooling speed is fast.
● Provide a pour point test tube to measure the pour point value of the oil product.
Main technical specifications and parameters
| Cold bath temp control | RT ～-40℃ |
| Pour point range | RT ～-25℃ |
| Refrigeration system | New refrigeration compressor |
| Working power supply | AC220V ± 10% 50Hz |
| Power consumption | no more than 1000W |
| Ambient temperature | ≤ 30℃ |
| Relative humidity | ≤ 85% |
| Instrument size | 380*480*580mm |
| Weight | 40kg |
| Consumables required | alcohol |
Note: The appearance pictures, dimensions, volume and weight of the instrument are for reference only. If there are any updates to the instrument, they may be slight changes without prior notice.
SD510-Q Petroleum Pour Point Tester Matched with Pour Point Test Tube Pour Point Thermometer Comply with GB/T3535
Details of petroleum product pour point tester
| S/N | Name | Quantity | Unit | Remarks |
| 1 | Host | 1 | Set | |
| 2 | Pour point glass tube | 2 | piece | |
| 3 | Pour point thermometer | 2 | Piece | |
| 4 | Pour point test tube sleeve | 2 | Piece | |
| 4 | Power cord | 1 | Piece | |
| 5 | Fuse tube | 1 | Piece | |
| 6 | Instruction manual | 1 | Copy | |
| 7 | Packing list | 1 | Copy | |
| 8 | Certificate warranty card | 1 | Copy |
Recommended Products