All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
Phone Number :
+8613220512573
WhatsAPP :
+8613220512573
Keywords [ flash point tester ] match 100 Products.
SD3536 Semi Automatic Open Flash Point Tester ASTM D92 Room Temp～400 ℃ Scale Division 2℃
| Heating Device: | Electric Furnace Heating, No Open Flame, Explosion-proof |
|---|---|
| Temp Gauge Division: | 2 ℃ |
| Temperature Gauge: | Room Temp～400 ℃ |
ISO 3679 Low Temperature Closed Flash Point Tester Balancing Method 2ml Sample
| Flash Point Detection Range: | (-30 ～ +100) ℃ |
|---|---|
| Sample Size: | 2ml |
| Data Storage: | 200 Sets |
Diesel Fuel Manual Closed Cup Flash Point Tester Heating Rate 1 ～ 12℃/Min ASTM D93
| Heating Device: | 0 ～ 600W Continuously Adjustable |
|---|---|
| Sample Heating Rate: | 1 ～ 12℃/min |
| Standard Oil Cup Inner Diameter: | 50.7 ～ 50.8mm |
ASTM D93 Closed Cup Flash Point Tester For Diesel Fuel RT ～ 390℃ StepB Stirring 250±10rpm
| Temp Measurement Range: | RT ～ 390℃ |
|---|---|
| Accuracy: | ≥104℃, ±2℃; ≤104℃, ±1℃ |
| Resolution: | 0.1℃ |
Manual Closed Cup Flash Point Tester ISO2719:2002 Binsky Martin
| MODEL: | SD261 |
|---|---|
| Working Power Supply: | AC220V±10%, 50Hz. |
| Heating Device: | Heating Power From 0 ~ 600W Continuously Adjustable. |
SH21789A Flash Point Tester Abel Closed Cup Method FOR Petroleum Products
| MODEL: | SH21789A |
|---|---|
| Power Supply: | AC 220V± 10% 50Hz |
| Power: | 350W |
VIDEO
ASTM D93 ABC Step Conversion Of National Standard Fully Automatic Closed Flash Point Tester SH105BS
| MODEL: | SH105BS |
|---|---|
| Working Power Supply: | AC220V±10%， 50Hz |
| Step A: | Heating Rate: 5 ~ 6℃/min |
SH105D balance method low-temperature closed flash point tester for closed flash point detection of paints and paints
| MODEL: | SH105D |
|---|---|
| Power Supply: | AC 220V±10%, 50 Hz |
| Flash Point Measurement Range: | -30~100°C |
Power Ac220v±10% 50hz Pensky Martens Closed-Cup Flash Point Tester For Oil Testing About 15kg
| Working Power Supply: | AC220V±10%, 50Hz |
|---|---|
| Temperature Measurement Range: | Room Temperature ~ 390℃ |
| Temperature Measurement Accuracy: | ≥ 104℃ ± 2℃ ≤ 104℃ ± 1℃ |
70ml Sample Manual Closed Flash Point Tester ASTM D93 Heating Rate 1-12 ℃/Min
| Instrument Weight: | 6 Kg |
|---|---|
| Instrument Size: | 310 * 300 * 290 Mm |
| Depth Of Oil Testing Capacity Marking Line: | 33.9-34.3 Mm |