All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
Phone Number :
+8613220512573
WhatsAPP :
+8613220512573
Hydraulic Oil Sealing Adaptability Index Tester RT ～ 200℃±1℃ PID Temp Controller SH/T 0305
| Heating Power: | Electric Heating Wire Heating |
|---|---|
| Temp Control Mode: | PID Temp Controller |
| Temp Control Range: | RT ～ 200℃±1℃ |
Synthetic Oil Portable Oil Particle Contamination Meter 1 ～ 500μM 0 ～ 80℃ ISO 4402
| Light Source: | Semiconductor Laser |
|---|---|
| Offline Detection Speed: | 5 ～ 60mL/min |
| Online Pressure Detection: | 0.1 ～ 0.6Mpa |
16 Channles Automatic Oil Pollution Particle Counter Shale Oil 0.8um ～ 600um ISO 4406
| Light Source: | Semiconductor Laser |
|---|---|
| Particle Size Range: | 0.8um ～ 600um (according To Different Sensors) |
| Detection Channels: | 16 Channel, The Particle Size Of Any Settings |
8 Channels Turbine Oil Portable Oil Pollution Particle Counter Sample 0.2-1000ml ISO 11171
| Light Source: | Semiconductor Laser |
|---|---|
| Size Range: | 0.8-500um |
| Detection Channel: | 8 Channels, Arbitrary Set Particle Size |
Hydraulic Oil Hydrolytic Stability Instrument RT ～ 200℃ 6 Test Bottles 2KW ASTM D2619
| Temp Control Range: | RT ～ 200℃ |
|---|---|
| Temp Control Accuracy: | ±1℃ |
| Temp Control Mode: | PID Temp Controller |
Lubricating Grease Shear Testing Machine Motor 1400rpm Shear Rate 60 Times/Min ASTM D217
| Motor: | Horizontal Single-phase Capacitor Starting |
|---|---|
| Motor Speed: | 1400 RPM |
| Shear Rate: | 60 Times/min |
Fully Automatic Water-Soluble Acid Tester PH3.8 ～ 7.0 Colorimetric Method ASTM D2599
| Test Range: | PH3.8 ～ 7.0 |
|---|---|
| Measurement Error: | ≤±0.05 PH |
| Repetitiveness: | ≤ 0.05 PH |
Single Hole Solidifying Point Pour Point Cold Filter Point Tester 7-Inch LCD ASTM D97
| Refrigeration Method: | Fully Enclosed High-efficiency Refrigeration Compressor |
|---|---|
| Test Cold Trap: | 1 |
| Temp Range: | +30℃ ～ -70℃ |
Solidifying Point Cold Filter Point Tester -70 ～ 30 ℃ PT100 Sensor Single Hole ASTMD 6371
| Temp Measurement Range: | -70 ～ 30 ℃ |
|---|---|
| Resolution: | 0.1℃ |
| Pressure Measurement Range: | 0-200.0KPa |
Automatic Cold Filter Point Tester -70 ～ 30℃ PT100 Sensor Air Cooling ASTMD 6371
| Temp Measurement Range: | -70 ～ 30℃ |
|---|---|
| Resolution: | 0.1℃ |
| Pressure Measurement Range: | 0 ～ 200.0KPa |