0-400ma Automatic Trace Moisture Meter 0.00001% ～ 100% Lcd Display Astm D6304

SH103A Automatic trace moisture meter

SH103A automatic trace moisture measuring instrument introduction

High sensitivity, high precision, high reproducibility, Chinese menu and prompt, simple and intuitive operation, low power consumption and energy saving design, suitable for petroleum, chemical, electric power, pharmaceutical and other fields, can be tested sample type: solid, liquid, gas.

This instrument adopts the Karl Fischer Coulomb titration method, which can reliably determine trace moisture in liquid, gas, and solid samples. During testing, for solids that are insoluble in reagents and substances that are prone to contaminating electrodes and reagent reactions, corresponding solid, gas, and liquid samplers can be used for indirect determination. It is an efficient and fully automated analytical instrument. Widely used in industries such as power, petroleum, chemical, pharmaceutical, railway, environmental protection, and scientific research institutions.

The relative molecular energy of water is much smaller than that of oil. After gasification, the volume increases sharply, causing an increase in system pressure drop and power consumption. Therefore, the high content of oil can cause fluctuations in device operation and cause tower flushing. And the inorganic salts (Call2, MgCl2) brought in by water can also exacerbate the corrosion of the device

Istrument characteristics

● 128×64 dot matrix LCD screen, Chinese prompt operation, intuitive and friendly

● The use of electrolyte blank current compensation, electrolyte balance point drift compensation to correct the measurement results

● Large electrolytic current, can quickly reach the balance point, into the test state

● With the function of calendar clock, the storage time of power down is 10 years

Main technical indicators

Note: The appearance pictures, dimensions, volume and weight of the instrument are for reference only. If there are any updates to the instrument, they may be slight changes without prior notice.

Meet the following standards

● GB/T7600 "in operation transformer oil moisture content determination method (coulomb method)"

● GB6283 "chemical products in the determination of moisture content Karl Fischer method (general method)"

● SH/T0246 "determination of water content in light petroleum products (electric quantity method)"

● SH/T0255 "additives and lubricating oil containing additives moisture determination method (electric quantity method)"

● GB/T11133 "Determination of water content in liquid petroleum products (Karl Fischer method)"

● GB/T7380 "surfactant water content determination (Karl Fischer method)"

● GB10670 "industrial fluoromethane in the determination of trace moisture in the Karl Fischer method"

● GB/T606 General method for determination of moisture in chemical reagents Karl Fischer method

● GB/T8350 "denatured fuel ethanol"

● GB/T8351 "automotive ethanol gasoline"

● GB/T3776.1 "pesticide emulsifier moisture determination method"

● GB/T6023 Determination of trace moisture in butadiene for industrial use - Karl Fischer Coulomb method

● GB/T3727 Industrial ethylene, propylene determination of trace water

● GB/T7376 Determination of trace moisture in fluoroalkanes for industrial use

● GB/T18619.1 Determination of water content in natural gas -- Karl Fischer - Coulomb method

● GB/T512 "grease moisture determination method"

● GB/T1600 -- Determination of pesticide moisture

● GB/T11146 "crude oil water content determination method (Karl Fischer coulomb method)"

● GB/T12717 "industrial acetate test method"

● GB/T5074 Coking products -- Determination of moisture

● GB/T18826 <1,1, 2-tetrafluoroethane (HFC-134a) for industrial use>

Shandong Shengtai Instrument Co., Ltd. provides the following quality assurance for the instruments sold to you:

----The provided instrument materials are brand new, meet national quality standards, and have a manufacturer's certificate of conformity;

----The materials and main components provided meet the technical requirements specified in the technical documentation;

----The overall quality assurance period of the equipment is one year (excluding normal wear and tear of vulnerable parts).

----We are responsible for free maintenance of any instrument quality issues that occur during the warranty period. Due to equipment malfunction caused by the user's responsibility, we are responsible for repairing and charging reasonable fees.

----Lifetime discounted supply of parts for equipment, and lifetime maintenance and repair of the entire machine.

----After the expiration of the warranty period, if the user needs maintenance and technical services, we will only charge a cost fee.

Packing list