Trace Moisture Meter 0.00001% ～ 100% Karl Fischer Coulomb Dual CPU ASTM D0304

SH103 Trace moisture meter

The SH103 trace moisture analyzer is based on the Karl Fischer Coulomb titration principle and complies with the third method Karl Fischer method in GB/T 2288-2008 Coking Product Moisture Determination Method. It supports multiple calculation formulas and complies with the standards GB/T 11133, ASTM D 0304, and ASTM D1533.

Adopting microcomputer automatic control, 32-bit embedded microprocessor as the main control core, embedded in mini operating system; The instrument comes with constant current detection and dual circuit balanced titration functions; The electrolytic cell adopts a new waterproof sealing design; Compared with similar advanced products at home and abroad, it has advantages such as high sensitivity, fast electrolysis speed, short balance time, accurate blank deduction, and accurate and reliable analysis results.

It is a high-quality analytical instrument for departments such as petroleum, chemical, power, environmental protection, medicine, and scientific research.

Technical parameters:

The Karl Fischer Coulomb method is a reliable method for determining trace moisture in different substances, in accordance with GB/T11133. This trace moisture analyzer has successfully applied this method and adopted microcomputer control. Its analysis speed is fast, accuracy is high, LCD screen Chinese display, automatic printing, dual CPU design, blank current automatic deduction function, instrument fault self diagnosis, menu selection and other functions, To achieve better operation and use, with a simple and fully automated analytical instrument. It is an ideal instrument for oil moisture analysis

Required consumables: Karl Fischer reagent, the instrument itself comes with a set of reagents, which can be purchased or self equipped after use.

Note: The appearance pictures, dimensions, volume and weight of the instrument are for reference only. If there are any updates to the instrument, they may be slight changes without prior notice.

Meet the following standards:

● GB/T7600 Determination of Moisture Content of transformer oil in Service (Coulometric Method)

● GB6283 "Determination of Moisture Content in Chemical Products - Karl Fischer Method (General Method)"

● SH/T0246 "Method for determination of water content in light petroleum products (coulometric method)"

● SH/T0255 "Additives and Lubricating Oils Containing Additives - Determination of Water Content (Coulometric Method)"

● GB/T11133 "Method for Determination of Water Content in Liquid Petroleum Products (Karl Fischer Method)"

● GB/T7380 "Surface active agents - Determination of water content (Karl Fischer method)"

● GB10670 "Determination of Trace Moisture in Industrial Fluoromethanes by Karl Fischer Method"

● GB/T606 Chemical Reagents - General Method for the Determination of Moisture - Karl Fischer Method

● GB/T8350 "Denaturated Fuel Ethanol"

● GB/T8351 "Ethanol gasoline for vehicles"

● GB/T3776.1 "Determination of Water Content in Pesticide Emulsifiers"

● GB/T6023 Determination of Trace Moisture in Industrial Butadiene - Karl Fischer Coulomb Method

● GB/T3727 Determination of Trace Water in Ethylene and Propylene for Industrial Use

● GB/T7376 Determination of trace moisture in industrial fluoroalkanes

● GB/T18619.1 Determination of Water Content in Natural Gas Karl Fischer Coulomb Method

● GB/T512 "Determination of Moisture Content in Lubricating Greases"

● GB/T1600 Determination of Moisture Content in Pesticides

● GB/T11146 "Determination of Water Content in Crude Oil (Karl Fischer Coulomb Method)"

● GB/T12717 "Test Methods for Acetic Esters for Industrial Use"

● GB/T5074 Method for Determination of Moisture in Coking Products

● GB/T18826 Industrial 1,1,2-Tetrafluoroethane (HFC-134a)

Shandong Shengtai Instrument Co., Ltd. provides the following quality assurance for the instruments sold to you:

----The provided instrument materials are brand new, meet national quality standards, and have a manufacturer's certificate of conformity;

----The materials and main components provided meet the technical requirements specified in the technical documentation;

----The overall quality assurance period of the equipment is one year (excluding normal wear and tear of vulnerable parts).

----We are responsible for free maintenance of any instrument quality issues that occur during the warranty period. Due to equipment malfunction caused by the user's responsibility, we are responsible for repairing and charging reasonable fees.

----Lifetime discounted supply of parts for equipment, and lifetime maintenance and repair of the entire machine.

----After the expiration of the warranty period, if the user needs maintenance and technical services, we will only charge a cost fee.

Packing list