All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
WhatsApp :
+8615665870097
VIDEO
Heavy oil, crude oil, dark petroleum SH113B-N petroleum pour point tester (metal bath)
| MODEL: | SH113B-N |
|---|---|
| Working Power Supply: | AC220V ± 10%; 50Hz |
| Temperature Control Range: | Room Temperature~- 70 ℃ |
VIDEO
Petroleum pour point measuring instrument cooled by compressor at room temperature~-70 ℃
| MODEL: | SH113B-Q |
|---|---|
| Working Power Supply: | AC220V ± 10%; 50Hz |
| Temperature Control Range: | Room Temperature~- 70 ℃ |
VIDEO
SH113B-Q Petroleum pour point tester compressor refrigeration small LCD display
| MODEL: | SH113B-Q |
|---|---|
| Working Power Supply: | AC220V ± 10%; 50Hz |
| Temperature Control Range: | Room Temperature~- 70 ℃ |
VIDEO
Manual pour point meter/tester (metal bath) for Hydraulic Oil The standard ASTM D97 Determination of the pour point o
| Warranty: | 12Months |
|---|---|
| Key Words: | Pour Point Tester For Hydraulic Oil |
| Standard: | ASTM D97 |
VIDEO
SH113B-Z Petroleum Cloud Point Tester is according to GB 6986-1986
| MODEL: | SH113B-Z |
|---|---|
| Working Power Supply: | AC220V ± 10%; 50Hz |
| Temperature Control Range: | Room Temperature~- 70 ℃ |
VIDEO
Determination of cone penetration of SH269 lubricating grease and petroleum grease for 100000 shear testing machines
| Motor: | Horizontal Single-phase Capacitor Starting Motor Speed: 1400 RPM |
|---|---|
| Coupling: | Plum - Shaped Elastic Coupling |
| Worm Gear Reducer: | Adopt Double Shaft Reducer With Transmission Ratio Of 25:1. Install A Pair Of Eccentric Mechanism On Worm Wheel Axles On Both Sides Of The Reducer. |
VIDEO
Lubricating grease manual tamper manual pressure shearing cone penetration pre-treatment SH269-1
| MODEL: | SH269-1 |
|---|---|
| Working Schedule: | 67-71mm |
| Orifice Plate On The Hole Diameter: | 6.35 + 0.13 Ф |
VIDEO
SH269-1Manual grease tamper bimetallic thermometer According to the requirements of GB/T269-91
| MODEL: | SH269-1 |
|---|---|
| Working Schedule: | 67-71mm |
| Orifice Plate On The Hole Diameter: | 6.35 + 0.13 Ф |
VIDEO
Petroleum Products Lubricant Tester Mechanical Grease Worker ASTM D217 ISO2137
| Standard: | GB/T269, ASTM D217, ISO 2137 Etc |
|---|---|
| Key Words: | Mechanical Grease Worker |
| Share Rate: | 60 Times/Min Or 100000 Times/Min |
VIDEO
Lubricating grease manual operator SH269-1Manual pressure shearing
| MODEL: | SH269-1 |
|---|---|
| Orifice Plate On The Hole Diameter: | 6.35 + 0.13 Ф |
| Working Schedule: | 67-71mm |