All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
Phone Number :
+8615665870097
WhatsApp :
+8613805402265
Fully automatic pour point measuring instrument - Dry trap cold bath dual stage refrigeration system
| MODEL: | SH113C |
|---|---|
| Testing Range: | +30℃--below Zero 70℃ |
| Standard: | GB/T3535 ASTM D97 |
Transformer Oil Testing EquipSH0804 Electrical insulation oil corrosive sulfur tester PT100 sensor, PID digital display
| MODEL: | SH0804 |
|---|---|
| Operating Temperature: | Normal Temperature ~ 200℃ |
| Temperature Control Accuracy: | ±1℃ |
SH259B Fully automatic water-soluble acid analyzer colorimetric method for measuring pH value
| MODEL: | SH259B |
|---|---|
| Power Supply: | AC220V.50Hz |
| Standard.: | GB/T7598-2008 |
SH112E Manual setting out and cleaning of low-temperature petroleum kinematic viscometer
| MODEL: | SH112E |
|---|---|
| Power Supply: | AC 220V±10%, 50Hz ±5% |
| Ambient Temperature: | 5℃-40℃ |
ISO 2719, ASTM D93 Closed Flash Point Tester Electric ignition
| Standard: | ASTM D93 GB/T261 ISO 2719 |
|---|---|
| Temperature Range: | Room Temperature～300℃ |
| Temp Repeatability: | ≤3℃ |
Lube Oil Testing EquipmentIntegrated Design of SRH Simple Lubricating Oil Wear Resistance Tester
| MODEL: | SRH |
|---|---|
| Voltage: | AC 220V±5% 50-60HZ |
| Power: | 120W |
Edible Oil Testing Equipment ST149B Automatic oxidation stability tester (oxygen pressure change method)
| MODEL: | ST149B |
|---|---|
| Power Supply: | AC220V±10%. |
| Heating Tube Power: | 2500W. |
Palm oil and peanut oil detection instrument ST149 fully automatic oil oxidation stability tester
| Power Source: | AC220V ±10% 50Hz |
|---|---|
| Heating Power: | 600W |
| Air Pump Flow: | 10L/H (adjustable) |
SH123Calibration of built-in curve for visual measurement of vegetable oil smoke point tester
| Temperature Measurement Range:: | Room Temperature -300 ℃, |
|---|---|
| Power Supply:: | 220V, 50Hz |
| Volume:: | Length 26 Width 28 Height 80 |
SH125A Oil pressure tester with dry aluminum alloy shell has high efficiency and accurate measurement
| MODEL: | SH125A |
|---|---|
| Output Test Voltage: | 0-80KV |
| Equipment Capacit: | 0.5KVA, Booster Capacity 1.5 KVA |