Methods of flash point detection of coatings and sampling and sample treatment

According to the national standard GB 3186-82 "Sampling of Paint Products", representative paint samples are taken out from the paint products to be tested.
Before the test, the sample should be placed in an airtight container with no more than 10% of the free volume of the container.
Samples should not be stored in plastic (PE, PP, etc.) bottles.
Coating of the determination of flash point detection using GB/T5208 flash point balance cup method to determine quickly, shandong shengtai instrument co., LTD., research and development production SH105D balance method of low temperature closed flash point tester is in accordance with the law of the People's Republic of China standard GB/T 5208 quick balance closed cup method for the determination of the flash point, the requirements of the design and manufacture, the result can be stored microcomputer, can U disk output data to the computer.
The instrument also meets the requirements of ISO 1523 and ISO 3679.
This instrument is especially suitable for testing the flash point of all kinds of color paints, paints, adhesives, solvents, petroleum and related products in the range of -30℃ ~ +100℃.
Main technical indicators and parameters
1. Upgrade to 7-inch touch color screen display
2. Flash point detection range: (-30 ~ +100)℃;
3. Precision measurement: the absolute difference between the two experimental results is less than 2℃ (by the same operator);
The absolute difference between the two experimental results is less than 3℃ (different operators);
4. Temperature control accuracy: ±0.1℃;
5. Ignition device: electronic ignition;
6. Refrigeration mode: semiconductor internal refrigeration and external compressor refrigeration cycle
7. After upgrading, 199 sets of historical data can be stored for easy query;
At the same time, U disk output function
8, Laser printer interface, can be linked to HP1108 laser printer (optional)
9. Date password setting function.
10, standard micro printer automatic measurement automatic thermal printing
11. Equipped with TCP network transmission function
12. Upload and connect to limis system
13. Conforming to standards: conforming to Chinese standards GB/T5208-2008, GB5207, GB7634, GB/T21790
14. Power supply voltage: AC220V± 10%, 50Hz;
15. Machine power consumption: no more than 300W
16. Ambient temperature: 5℃ ~ 30℃;

17. Relative humidity: (30 ~ 80)%.