All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
Phone Number :
+8613220512573
WhatsAPP :
+8613220512573
Keywords [ pharma test hardness tester ] match 0 Products.
Sorry!
Your search "pharma test hardness tester" match no products.
You can Request A Quote to let us to match products for you.
Related Products
Gear Oil Automatic Trace Moisture Meter Electrolytic Current 0 ～ 400mA ASTM D6304
| Measurement range | 0.00001% ～ 100% or 0.1ppm ～ one million ppm |
|---|---|
| Measurement accuracy | When the water volume is between 10ug and 1000ug, the error is less than ± 3ug; when the water volume is greater than 1000ug, the error is less than ± 0.3% |
| Resolution | 0.1ug |
| Electrolytic current | 0 ～ 400mA |
Crude Oil Trace Moisture Meter Measure 0.00001% ～ 100% Karl-Fischer Method ASTM D6304
| Display mode | Color touch screen display |
|---|---|
| Measurement range | 0.00001% ～ 100% or 0.1ppm ～ one million ppm (1ppm=0.0001%) |
| Resolution | 0.1ug |
| Titration rate | 2.5mg/min (maximum) |
Crude Oil Semi-Automatic Density Tester 0 ～ 100℃ USB Drive Output ASTM D1298
| Temp measurement range | 0 ～ 100℃ or (customized -60℃ ～ 80℃) |
|---|---|
| Temp control | 0.1℃ |
| Test tube capacity | 500ml |
| Cooling method | Compressor cooling |
Gear Oil Fully Automatic Constant Temp Density Meter 0.0001～1.999g/Cm³ ASTM D4052
| Measurement range of density | 0.0001～1.999g/cm³ |
|---|---|
| Density measurement accuracy | ±0.0005g/cm³ |
| Density value resolution | ±0.0005g/cm³ |
| Constant temperature control | 20℃±0.1℃ |
Dual Holes Semi-Automatic Crude Oil Density Meter PT100 Sensor RT ～80℃ ASTM D1298
| Number of measurement holes | 2 holes |
|---|---|
| Bathtub capacity | Ф250 * 300mm |
| Test tube capacity | 500ml |
| Temp control range | RT ～80℃ or 5℃ ～ 80℃(optional cooling) |
2 Holes Density Tester Of Crude And Liquid Petroleum Products RT ～ 80℃ ASTM D1298
| Bathtub capacity | Ø250 × 300mm |
|---|---|
| Test tube capacity | 500ml |
| Temp control range | RT ～ 80℃ or 5℃ ～ 100℃ for cooling |
| Temp control accuracy | ± 0.1℃ |
GB/T 511 Hydraulic Oil Mechanical Impurity Analyzer Resolution 0.1℃ 7-Inch LCD Display SH101C
| Display | 7-inch LCD display |
|---|---|
| Temperature | 4-channel PID temperature control |
| Temperature control range | RT ～ 100℃ |
| Display accuracy | 0.1℃ |
SH101B Gear Oil Mechanical Impurity Meter RT ～ 100℃ 4-Channel PID Temp Control GB/T 511
| Tempe control mode | 4-channel PID temp control |
|---|---|
| Temp control range | RT ～ 100℃ |
| Display accuracy | 0.1℃ |
| Resolution | 0.1℃ |