All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
Phone Number :
+8615665870097
WhatsApp :
+8613805402265
Keywords [ flour testing equipment ] match 1012 Products.
ASTM D 942 Fully automatic grease oxidation stability tester 2-hole automatic recording SH0325B
| MODEL: | SH0325B |
|---|---|
| Heating Power: | 1500W |
| Temperature Control Point: | 99℃ |
ST120B Automatic durometer single chip microcomputer control, blue LCD LIQUID crystal
| Maximum Pressure Measured: | 200N (20kg) |
|---|---|
| Maximum Diameter Measured: | 30mm |
| Measure Minimum Diameter: | 2mm |
ASTM D4049 - Determining the Resistance of Lubricating Grease to Water Spray SY0643
| MODEL: | SY0643 |
|---|---|
| Applicable Standard: | SH/T0643-97 ASTM D4049 |
| Control Temperature: | 38±0.5℃ |
Liquefied Petroleum Gas Testing SH/T 0232 LPG Copper Corrosion Tester SD0232
| MODEL: | SD0232 |
|---|---|
| Power Supply: | AC220V±10%,50Hz |
| Temperature Senser: | Industrial Platinum Resistance Pt100 |
Automatic Oxidation Stability of Lubricating Grease Tester ASTM D942 Grease antioxidation stability Analyzer SH0325B
| MODEL: | SH0325B |
|---|---|
| Heating Power: | 1500W |
| Temperature Control Point: | 99℃ |
Test 1-3 oil samples at a time using the color indicator method of SH108A fully automatic oil acid value meter
| MODEL: | SH108A |
|---|---|
| Range: | 0.001~ 3.000 MgKOH/g |
| Power Rate: | 300 W |
SH3554 Petroleum Asphalt Wax Content Tester / Bitumen Wax Content Testing Apparatus
| MODEL: | SH3554 |
|---|---|
| Working Power Supply: | AC220V±10% 50Hz |
| Water Bath Temperature: | Room Temperature ~95℃±0.5℃ |
SH103 trace moisture analyzer adopts the Karl Fischer Coulomb titration principle ASTMD 0304, ASTM D1533
| Resolution: | 0.1ug |
|---|---|
| Electrolytic Control: | Automatic Electrolytic Current Tracking Control (maximum 400mA) |
| Titration Speed: | 2.5mg/min(maximum) |
Laboratory GB/T262 Petroleum Products and Hydrocarbon Solvents Aniline Point Tester
| MODEL: | SD262A |
|---|---|
| Temperature Control Range: | Room Temperature To 200ºC |
| Temperature Control Accuracy: | ≤0.5℃ |
ASTM D130 petroleum products copper corrosion tester /Oil Copper Corrosion Tester SD5096
| Power Supply Voltage: | 220V±10%, 50Hz |
|---|---|
| Temperature Sensor: | Industrial Platinum Resistance, Its Indexing Number Is Pt100 |
| Temperature Control Range: | Room Temperature ~ 200℃ Arbitrary Setting; |

