All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
WhatsApp :
+8615665870097
Heavy oil and crude oil motion viscometer ASTM D445 manual lofting and automatic judgment 4 holes
| MODEL: | SH112 |
|---|---|
| Power Supply: | AC 220V ± 10%, 50HZ ± 5% |
| Heating Power: | 1800W |
Fully automatic petroleum product pour point tester Single hole SH113E glass test tube automatic tilting method
| MODEL: | SH113E |
|---|---|
| Compliance With Standard: | GB/T510 |
| Temperature Range: | +30 ℃~-70 ℃ |
Principle of Titration Neutralization Method SH108 Oil Acid Number Tester Essential for oil refineries
| MODEL: | SH108 |
|---|---|
| Power Supply: | 220V±10%,50Hz±1% |
| Ambient Temperature: | 10 ℃ ~ +30℃ |
Essence and fragrances Determination of flash point SH105E automatic Binsky Martin closed flash point tester
| MODEL: | SH105E |
|---|---|
| Working Power Supply: | AC220V ± 10%, 50Hz |
| Method Of Use: | Binsky Martin Closed Cup Method |
SH105D balance method low-temperature closed flash point tester for closed flash point detection of paints and paints
| MODEL: | SH105D |
|---|---|
| Power Supply: | AC 220V±10%, 50 Hz |
| Flash Point Measurement Range: | -30~100°C |
Automatic Binsky Martin Closed Flash Point Tester Automatic Electronic Ignition SH105B
| MODEL: | SH105B |
|---|---|
| Working Power Supply: | AC220V±10%， 50Hz |
| Power Consumption Of The Whole Machine: | Not More Than 500W. |
ASTM D93 ABC Step Conversion of the New National Standard Fully Automatic Closed Flash Point Tester SH105BS
| MODEL: | SH105BS |
|---|---|
| Working Power Supply: | AC220V±10%， 50Hz |
| Step A: | Heating Rate: 5 ~ 6℃/min |
Automatic calculation results of SH101C automatic mechanical impurity content analyzer (with balance)
| MODEL: | SH101C |
|---|---|
| Temperature: | 4-way PID Temperature Control |
| Temperature Control Range: | Room Temperature~100 ℃ |
Mechanical impurity content detection of lubricating oils and additives SH101 gravimetric method
| MODEL: | SH101 |
|---|---|
| Power: | AC220V±10% 50Hz |
| Temperature Control Accuracy: | ≤± 1 ℃. |
ASTM D1120 Engine coolant boiling point tester Heating mantle heating tap water circulating cooling
| MODEL: | SH0089 |
|---|---|
| Applicable Standards: | ASTM D1120, SH/T0089 Or SH/T0430 |
| Heating Mode: | Electric Heating-jacket |