All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
Phone Number :
+8613220512573
WhatsAPP :
+8613220512573
2 Pipes Hydraulic Oil Lubricating Oil High Temperature Foam Analyzer Oil Bath Heating ASTM D6082
| Temp Control Method: | PID Digital Temp Controller |
|---|---|
| Tempe Control Accuracy: | ± 0.1℃ |
| Heating Method: | Oil Bath Heating |
ASTM D892 Foaming Characteristics Of Lubricating Oils Analyzer PT100 Sensor 5 ～ 100℃
| Temp Control Method: | LCD Color Screen Display |
|---|---|
| Temp Control Range: | 5 ～ 100℃, Equipped With A Cooler |
| Temp Control Accuracy: | ± 0.1℃ |
ASTM D482 Ash Tester For Quenching Oil Heating RT ～ 1000℃ Thermocouple Temp Control
| Heating Range: | RT ～ 1000℃ |
|---|---|
| Temp Control: | 775 ± 25℃ |
| Temperature Control Element: | Thermocouple |
ASTM D2265 Over-Wide Temp Range Dropping Point Analyzer For Guideway Oil 6 Holes
| Measuring Range: | RT ～ 400℃ |
|---|---|
| Temp Control Mode: | Digital Meter, Constant Temperature And Stability |
| Test Sample: | 6 |
ASTM D1264 Lubricating Crease Water Washout Characteristics Analyzer RT ～ 100°C Type 204 Bearing
| Sink Capacity: | ≥750ml |
|---|---|
| Temp Control Range Of The Water Tank: | RT ～ 100°C, Continuously Adjustable |
| Bearing Speed Accuracy: | 600±30 R/min |
Lithium Grease Micro Moisture Analyzer Measure 3μg～100mg Karl-Fischer Mode ASTM D6304
| Titration Method: | Electrometric Titration |
|---|---|
| Electrolytic Current: | 0～400mA |
| Measuring Range: | 3μg～100mg（water） |
Engine Coolant Boiling Point Tester -5℃ ～ 300℃ Solid-State Voltage Regulator ASTM D1120
| Temp Control Method: | Solid State Voltage Regulator |
|---|---|
| Temperature Gauge: | -5℃ ～ 300℃ |
| Division Value: | 1.0℃, Comply With GB514 |
3 Holes Engine Coolant Corrosion Tester RT ～ +100℃ Electric Heating Plate Heating ASTM D1384
| Number Of Experimental Holes: | 3 Holes |
|---|---|
| Heating Method: | Electric Heating Plate Heating |
| Temp Control Range: | RT ～ +100℃, ± 0.1℃ |
3 Holes Engine Coolant Corrosiveness Tester RT ～ +100℃ Timing 0 ～ 9999h ASTM D1384
| Number Of Detection Holes: | 3 Holes |
|---|---|
| Temp Control Range: | RT ～ +100℃± 0.1℃ |
| Air Flow Meter: | 30 ～ 300ml/min |
Lubricant Similarity Viscometer Intensity 60Kg/Cm² Three Speed Rotation ГОСТ 7163
| Standard Capillary Sizes: | 0.025, 0.05, 0.1cm |
|---|---|
| Maximum Strength Of Spring Assembly: | 60Kg/cm² |
| Record Paper Size: | 110 * 300mm |