-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
ASTM D2274 Distillate Fuel Oil Oxidation Stability Tester Accelerated Method
Contact me for free samples and coupons.
WhatsApp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xMODEL | SH0175 | Power Supply | AC 220 V±10%, 50 Hz |
---|---|---|---|
Maximum Power Consumption | 2400W | Temperature Control Range | Room Temperature ~ 200℃ |
Temperature Control Accuracy | ±0.1ºC | Temperature Measuring Component | Thermal Resistance |
High Light | Distillate Fuel Oil Oxidation Stability Tester,ASTM D2274 Oxidation Stability Test,Oxidation Stability Test Accelerated Method |
ASTM D2274 Distillate Fuel Oil Oxidation Stability Tester Accelerated Method For Four Simultaneous Tests
Applicable standard and scope of application
SH0175 distillate fuel oil oxidation stability instrument is designed and manufactured according to the requirements stipulated in the People's Republic of China industry standard SH/T 0175 "distillate fuel oil oxidation stability determination method (acceleration method)".
It is suitable for the determination of intrinsic stability of intermediate distillate fuel oil by accelerated oxidation method according to the method specified in SH/T 0175 standard.
This instrument is the oil production, production, use units, the relevant universities, scientific research departments and other test distillate fuel oil oxidation stability performance of a preferred automatic instrument.
Main performance
The instrument is equipped with a temperature control table, used to control the temperature of the water bath at 95℃±0.2℃.
Users can also adjust the temperature control meter according to actual needs.
There are 4 test baths on the working table of the instrument, so 4 samples can be tested at the same time.
The instrument is equipped with four flowmeters, indicating the gas flow rate through the four oxidation tubes.
The gas source of the instrument is oxygen with purity of no less than 99.5%. The oxygen from the oxygen cylinder can be used directly.
If it comes from the factory oxygen main, it should be equipped with a filter and a pressure regulating valve before connecting to the instrument.
The oxygen input is on the side of the instrument.
The instrument is equipped with a timer to record the time of the test. When the time is up, there is an alarm.
The instrument is equipped with a darkbox for dark storage before the oxidation tube is placed in the heating bath and dark cooling after the oxidation tube is taken out.
Main technical indicators
1. Flow meter: 50ml/min+5ml/min, each oxidation tube is connected with a flow meter
2, oxygen tube: special high temperature resistant glass products.
3, Working power supply: AC220V50HZ, power consumption: ≤2400W.
4, temperature control mode: digital display temperature control meter automatic temperature control.
5, Temperature control range: room temperature ~ 200℃,
6, temperature control accuracy: setting temperature ±0.1℃.
7, temperature measurement element: thermal resistance.
8, the number of samples: 4, at the same time can be used for 4 samples.
1. Power supply | AC 220 V±10%, 50 Hz |
2. Maximum power consumption | 2400W |
3. Temperature control mode | digital display temperature control meter automatic temperature control. |
4. Temperature control range | room temperature ~ 200℃, |
5. Temperature control accuracy | ±0.1ºC |
6. Temperature measuring component | Thermal resistance |
7. The number of samples: | 4at the same time can be used for 4 samples. |
8.Flow meter | 50ml/min+5ml/min, each oxidation tube is connected with a flow meter |
9.Oxygen tube |
special high temperature resistant glass products.
|
Overall dimension: 520 × 420 × 510 (mm) Weight: 35kg |
packing list
S/N | Name | Quantity | Unit | Remarks |
1 | Distillate fuel oil oxidation stability tester host | 1 | set | |
2 | Equipped with black box | 1 | set | |
3 | Oxidation tube | 4 | piece | |
4 | condenser | 4 | piece | |
5 | Oxygen tube | 4 | piece | |
6 | Glass thermometer | 1 | piece | (50℃~100℃) |
7 | Bath cover | 4 | piece | |
8 | Hose (inside diameter φ 6) | 4 | piece | Flowmeter outlet to glass oxygen pipe - 50 mm/piece |
9 | Hose (inside diameter φ 6) | 1 | meter | For water inlet and outlet of glass condensate pipe, the length of each section shall be cut as required |
10 | Power cord | 1 | copy | |
11 | Instruction | 1 | copy | |
12 | Packing list | 1 | copy | |
13 | Certificate warranty card | copy |
Company Introduction
Shandong Shengtai Instruments Co., Ltd. is specialized in the research and production of experimental testing instruments and industrial testing instruments. It is a professional instrument company integrating instrument research and development, manufacturing, sales and service. Its products are widely used in food, flour, grain and oil, Feed, electricity, petrochemical, industrial oil, aerospace, coal quality and other industries.
For more than 10 years, Shengtai has always been adhering to the "first-class service, customer first" as the purpose, "reasonable price, honesty and trustworthiness" as the business policy. Adhere to technical innovation, with rich knowledge of the technical team and experienced, thoughtful after-sales service team.
Shengtai instrument as one of the most large-scale and competitive enterprises in the industry, with the strength of technology research and development, professional technical knowledge and innovative design concept, in the model improvement, Significant technical breakthrough has been achieved in the development of function expansion and intelligent control system.
OUR service
After-sales service commitment, our company to sell the product after-sales service commitment: warranty period of one year, long-term technical support outside the warranty period. During the warranty period, the seller shall bear the cost of the replacement of the equipment, the freight and maintenance of the instrument; outside the warranty period, the seller shall waive the maintenance fee and charge only the cost of the basic materials and freight charges when the instrument is malfunctioning and the seller shall not charge the maintenance fee during the warranty period.
Contact us
Shandong Shengtai Instrument Co.,ltd
ADD:6-8 time base NO.15 lanxiang road tianqiao Area Jinan city
TEL:+86 0531-85919987 85929987
FAX:+86 0531-85957987
Whatsapp/facebook:+86 13370527859
QQ:3206156217
Email:3206156217@qq.com
Web:www.labtool.net/en