USB kinematic viscosimeter,
Digital kinematic viscosimeter
SH112F automatic low temperature kinematic viscosimeter
SH112F full-automatic low-temperature petroleum kinematicity viscosimeter this instrument conforms to the national standard GB/T265 "petroleum products kinematicity viscosimetry and dynamic viscosimetry" standard and NB/SH/T0837 mineral insulation oil low-temperature kinematicity viscosimetry requirements.
Can be placed at the same time 2 viscosity and experiment, can be measured -20 degrees of viscosity, can also be measured 20 degrees of viscosity, it is recommended that the medium can choose antifreeze.
Automatic sampling, automatic cleaning, automatic detection, automatic results, automatic printing.
The main features are as follows:
1. The thermostatic bath is a low-temperature double-layer dewar bottle, with even temperature distribution and good temperature control effect.
2, this instrument USES the precision digital temperature controller to control the temperature in the bathtub, the execution component USES the solid state relay SSR, has the temperature control accuracy accuracy, no contact, no noise, no spark, fast action, long life and other characteristics.
3, timing detection: the use of high temperature optical fiber timing detection, not affected by the new oil and old oil, detection sensitivity can be adjusted digitally, timing 0-3000s, repeatability: ≤ 0.01s reproducibility: ≤ 0.02s
4, standard with micro printer automatic measurement automatic printing
5. It can also include a laser printer interface, which can be connected to an HP1108 laser printer (optional).
6, USB/232 communication interface and the upper computer communication, easy to form a centralized management system, this machine can be connected to the LIMS system
7. Cleaning device: the cleaning liquid is petroleum ether, and the cleaning liquid will be automatically extracted by the instrument. The waste sample and the liquid after cleaning will be automatically extracted into the waste sample bottle.
Main technical parameters:
Temperature control point: -40℃-60℃ set arbitrarily
Temperature control accuracy: ±0.1℃;
Display mode: 7 "color touch screen
Heating power: 1800W;
Power supply: ac 220V±10%,50HZ±5%;
Ambient temperature: 5℃-40℃;
Environmental humidity: < 85%;
External dimension: 190mm×380mm×280mm;
Customer's own supplies: water or alcohol.
Strictly according to the national standard, the viscosity tube test needs the following reagent cleaning: solvent oil or petroleum ether.