All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
Phone Number :
+8613220512573
WhatsApp :
+8613220512573
Keywords [ food testing equipment ] match 1111 Products.
ASTM D1831 Drum Stability Tester For Determining Lubricating Greases
| MODEL: | SH129 |
|---|---|
| Power Supply: | AC220V±10%;50Hz |
| Heating Method Heating: | Electric Heating Ring |
ASTMD1384 Engine coolant corrosion tester with water bath heating and built-in silent air compressor with three holes
| MODEL: | SH0085 |
|---|---|
| Power: | AC220V±10% 50Hz |
| The Power Consumption Of The Whole Machine: | Not More Than 2000W |
SH105D balance method low-temperature closed flash point tester for closed flash point detection of paints and paints
| MODEL: | SH105D |
|---|---|
| Power Supply: | AC 220V±10%, 50 Hz |
| Flash Point Measurement Range: | -30~100°C |
0～700 Coning Degree Vaseline Automatic Cone Penetrometer Tester Resolution 0.01mm
| Meet The Standard: | Chinese Pharmacopoeia |
|---|---|
| Measurement Range: | 0～700 Coning Degree |
| Constant Temperature Refrigeration: | External Semiconductor Refrigeration |
Resolution 0.01㎜ Oil Asphalt Cone Penetration Tester Standard Cone 102.5±0.05g Weight 11kg
| Standard: | GB/T4985、GB/T269、GB/T4509 |
|---|---|
| Measuring Range: | 0～600 Cone Degree/0～700 Cone Degree |
| Cone Timing Control Device: | The Time Can Be Set According To Their Own Needs, The Time Error Is Less Than±0.1 Seconds |
Resolution 0.01㎜ Constant Temperature Needle Penetration Tester Accuracy ±1 Weight 11kg
| Measuring Range: | 0～700 Taper Degree (digital Display Table 0-70mm) |
|---|---|
| Cone Entry Time Control Device: | Time Can Be Set According To Their Own Needs, The Time Error Is Less Than±0.1 Seconds |
| Resolution: | 0.01㎜ |
Lubricating oil foam characteristic tester SH126 automatic temperature control and automatic timing
| MODEL: | SH126 |
|---|---|
| Power: | AC220V±10% 50Hz |
| Test Cylinder Specification: | 1000mL |
Starch whiteness measurement ST001D liquid crystal whiteness meter d/o illumination observation
| MODEL: | ST001D |
|---|---|
| Working Power Supply: | AC220V±10% 50HZ |
| Zero Drift: | ≤0.1 |
SH 128C Jet Fuel Freezing Point Tester Fiber Optic Sensor for Determining Temperature Compressor Refrigeration
| MODEL: | SH128C |
|---|---|
| Power Supply: | AC 220 V±10%, 50 Hz |
| Working Cold Tank: | Double Vacuum Glass Bath |
ASTM D892 Foam Tester For Measuring Lubricant'S Foaming Tendency And Stability
| MODEL: | SH126 |
|---|---|
| Power: | AC220V±10% 50Hz |
| Temperature Of Baths: | The 24℃±0.5℃ Of Low Temperature The93.℃±0.5℃of High Temperature |