All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
Phone Number :
+8615665870097
WhatsApp :
+8613805402265
Keywords [ cold filter point tester ] match 71 Products.
ASTM D97 Fully automatic freezing point tester photoelectric detection technology, glass tube automatic tilting method
| MODEL: | SH113E |
|---|---|
| Temperature Control Range: | 30℃~ -70 ℃ |
| Working Power Supply: | AC220V ±10 ~ 50 Hz |
ASTM D97 Automatic Solidifying Point& Pour Point Tester lubricating Oil And Grease Antifreeze tester
| International Standard: | ASTM D97 |
|---|---|
| Working Power Supply:: | AC220V ± 10%; 50Hz. |
| Temperature Control Range:: | 30℃~ -70 ℃ |
VIDEO
SH7550 Crude oil wax content tester with Two slots and four holes stainless steel bath
| MODEL: | SH7550 |
|---|---|
| Working Power Supply: | AC220V±10%, 50Hz |
| Water Bath Heating Power: | 2.0KW |
SH0210 hydraulic oil filter test instrument PID temperature controller
| MODEL: | SH0210 |
|---|---|
| Temperature Range: | 0~60℃ |
| Working Pressure: | 86658Pa |
GB5009.227 Automatic Potential Drop Point Meter Range ≥ 0.001 MgKOH/G Accuracy ±0.2% F·S
| Measurement Range: | ≥ 0.001 MgKOH/g |
|---|---|
| Potential Measurement Range: | -2000.0 ~ +2000.0 MV |
| Basic Error Of Electronic Unit: | 0.1% F · S ± 0.1 MV |
Automatic freezing point, pour point, and cold filtration point measuring instrument SH0248CQ glass tube automatic tilti
| MODEL: | SH0248CQ |
|---|---|
| Temperature Range: | +30 ℃~-70 ℃ |
| Temperature Control Accuracy: | ＜± 0.1 ℃ |
Multifunctional Low Temperature Performance Tester For Petroleum Products SH113KF
| Applicable Temperature: | 15 ℃ ~ 30 ℃ |
|---|---|
| Relative Humidity: | ≤ 85% |
| Whole Power: | ≤ 1700W |
Low Temp Performance Tester For Petroleum Products Two Bath Isothermal SH113KS
| Cold Bath I: | Room Temp ～ -50 ℃ |
|---|---|
| Cold Bath II: | Room Temp ～ -70 ℃ |
| Temperature Control Accuracy: | ± 1 ℃ |
SH0248 Integrated design of cold filtration point suction device, float flowmeter, all made of stainless steel
| MODEL: | SH0248 |
|---|---|
| Power Supply: | AC 220V±10%, 50 Hz |
| Pumping Pressure: | 1961 Pa (200 Mm H2O) |
Crude oil wax content tester with two slots and four holes stainless steel bath SH7550
| Power Supply: | AC220V±10%, 50Hz |
|---|---|
| Water Bath Heating Power: | 2.0kW |
| Water Bath Temperature Control Range: | Room Temperature ~ 90℃ |