All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
Phone Number :
+8613220512573
WhatsAPP :
+8613220512573
0 ～ 4MPa Engine Coolant Cast Aluminum Alloy Corrosion Tester 0 ～ 999h ASTM D4340
| Timer: | Digital Timer 0 ～ 999h |
|---|---|
| Pressure Gauge: | 0 ～ 4MPa |
| Power: | 300W, Continuously Adjustable |
Chemical Reagent Boiling Point Tester RT ～ 300 ℃ Uniform Heating 1100W GB/T 616
| Heating Power Of Electric Furnace: | 300W |
|---|---|
| Whole Power: | Not Exceeding 1100W |
| Heating Range: | RT ～ 300 ℃ |
Crankshaft Simulation Tester RT ～ 400℃ Timing 0 - 99h Thermal Oxidation Stability SH/T 0300
| Temp Control Range: | Aluminum Plate (RT ～ 400℃) |
|---|---|
| Temp Control Accuracy: | ±1℃ |
| Timing: | 0 ～ 99h |
Anti-Rust Damp Heat Test Chamber RT ～ 80℃ Dual PT100 Sensor Test Water Depth 200mm SH/T 0692
| Temp Range: | RT ～ 80℃ Degrees Arbitrarily Set |
|---|---|
| Temp Fluctuation: | ≤±0.5℃ |
| The Test Depth: | 200mm |
Crude Wax Precipitation Point Tester -40℃ ～ 600℃ Oxidation Induction Period Test SY T 0545-2012
| Layout Quantity: | About 98ul |
|---|---|
| Temp Range: | -40℃ ～ 600℃ |
| Temp Repeatability: | ±0.1℃ |
Crude Oil Salt Content Tester Chloride Ion 0.1PPm ～ 10000mgCL-/L Coulometric Method ASTM D3230
| Salt Content: | 0.2PPm ～ 10000mgNaCL/L |
|---|---|
| Chloride Ion: | 0.1PPm ～ 10000mgCL-/L |
| Relative Error Of Samples With A Concentration Of<3 MgNaCL/L:: | ≤ 20% |
Automatic Touch Screen Oil Calorific Value Meter Rapid Oxygen Bomb Method GB/T 213
| Heat Capacity: | About 10500 J/K |
|---|---|
| Repeatability: | ± 30J/K |
| Capacity Of External Water Cylinder: | About 45L |
Coal Coke Calorific Power Meter Test 15min 6min Ignition Quality Inspection GB/T 213
| Thermal Capacity: | About 10500J/K |
|---|---|
| Resolution: | 0.001℃ |
| Test Time: | About 15min |
High Temperature And High Shear Tester RT ～ 150℃ Sample 7mL LCD Screen ASTM D5481
| Test Temp: | RT ～ 150℃ |
|---|---|
| Temp Control Accuracy: | ±0.1℃ |
| Work Unit: | 1 Unit Management |
Boundary Pumping Temperature Apparent Viscosity Meter -70 ～ 100℃ ASTM D3829
| Refrigeration Method: | Imported Compressor Refrigeration |
|---|---|
| Power: | 1200W |
| Temp Control Range: | -70 ～ 100℃ |