All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
Phone Number :
+8613220512573
WhatsAPP :
+8613220512573
Fully Automatic Characteristic Viscometer Temp 5 ～ 100℃ Timing 0.0s ～ 999.99s USP 911
| Temp Measurement Range: | 5 ～ 100℃ (with Refrigeration) |
|---|---|
| Temp Control Accuracy: | 0.1℃ |
| Timing Range: | 0.0s ～ 999.99s |
Dual Holes Automatic Drug Pour Point Analyzer -10 ℃ ～ +170 ℃ Air Cooling USP 40 651
| Display: | 7-inch Touchscreen Display |
|---|---|
| Number Of Test Holes: | Double Holes |
| Cold Bath Temp Control: | -10 ℃ ～ +170 ℃ |
Automatic Drug Pour Point Analyzer -10℃ ～ +170℃ Air Cooling ±0.1℃ USP 40 651
| Cooling Method: | Air Cooling |
|---|---|
| Display: | 7-inch Touch Screen Display |
| Refrigeration Method: | Compressor Refrigeration |
Automatic Drug Pour Point Analyzer Air Cooling -30 ℃~+80 ℃ Motor Speed 1200r/Min ST203B
| Working Cold Bath: | Double-layer Vacuum Glass Bath |
|---|---|
| Cold Mode: | Compressor Cooling |
| Display: | 7-inch Touchscreen Display |
Crystalline Thermal Analyzer RT ～ 600℃ Heating 0.1 ～ 100 ℃/Min DSC 0 ～ ± 600mW ChP 0981
| Temp Range: | RT ～ 600℃ |
|---|---|
| Temp Sensitivity: | 0.001℃ |
| Temp Fluctuation: | ± 0.01℃ |
Tablet Hardness Tester 0-200N Tablet Particle Hardness LCD Digital Display ST120A
| Measurement Pressure Range: | 0-20kg (0-200N) |
|---|---|
| Display Mode: | LCD Digital Display |
| Indication Error: | ± 0.5kg |
3 Woek Units Viscosity Tester Timing 10000h Built-In Lithium Battery ST107
| Test Board: | 125*125*2mm |
|---|---|
| Timing Range: | 10000h |
| Number Of Samples: | 3 |
Constant Temperature Holding Viscosity Tester RT ～ 200 ℃ PID Temp Control ASTM D3654
| Temp Control Range: | Normal Temp ～ 200 ℃ |
|---|---|
| Control Mode: | Microcomputer P I. D. Automatic Temperature Control Calculation |
| Temp Display Accuracy: | 0.1 ℃ |
Initial Adhesion Tester Table Width 120mm Steel Ball 1/32 Inch ～ 1 Inch ASTM D3121
| Adjustable Tilt Angle: | 0 ～ 60° |
|---|---|
| Table Width: | 120 Mm |
| Test Area Width: | 80 Mm |
Plaster Softening Point Tester RT -100 ℃ Timing 0 ～ 99min 59s Accuracy 0.1℃ ST104A
| Test Range: | RT -100℃ (customizable High Temperature Up To 180 ℃) |
|---|---|
| Timing Range: | 0 ～ 99min 59s |
| Temperature Measurement Accuracy: | 0.1℃ |