Automated SH0248C Cfpp Tester ASTM D97

solidifying Point Cold Filter Point Tester SH0248C automatic solidifying point cold filter point testASTMD97

SH0248C of solidifying point cold filtration point tester is based on national standard national standard GB/T510 "solidifying point measurement of oil products and on the basis of SH/T 0248, adopt modern advanced technology, mechanical, optical, electronic and computer technology into an organic whole, can automatically finish the solidifying point and cold filtration point of petroleum products testing, the instrument adopts photoelectric detection technology, automatic inclined glass tube method, imported compressor refrigeration system to ensure that meet the requirements of refrigeration and depth.
Ii. Compliance with standards:ASTM D97 and ASTMD 6371

   
1. Upgrade to 7-inch TFT color LCD display;
2. Refrigeration mode: fully enclosed and efficient refrigeration compressor.
3. Cold traps for test: 2.
4. Detection method: spectral detection
5. After upgrading, 199 sets of historical data can be stored for easy query;
At the same time can be equipped with U disk output function.
6, standard miniature printer automatic measurement automatic thermal printing (standard)
7. If there is no operator after the test, set the automatic shutdown time of the refrigerator within 0-50min to avoid the frequent opening of the compressor and extend the service life of the instrument.
8. Test interval: cold filter point 1℃ freezing point 2℃.
9. Temperature sensor: Imported Pt 100 probe
10. Refrigerating medium: metal bath
11. Laser printer interface, HP1108 laser printer can be linked (optional).
12. Date password setting function.
13, standard micro printer automatic measurement automatic thermal printing
14. Equipped with TCP network transmission function
15. Upload and connect to limis system
 

Iii. Technical Parameters:
1. Temperature measurement range: -70 ~ 50℃;
2. Pressure measurement range: 0 ~ 200.0kpa;Resolution 1 pa
3. Number of test samples: 2 channels
4. Temperature measuring element: PT100
5. Refrigeration mode: compressor refrigeration
6. Cooling method: air cooling
7, typing: 20 columns of Chinese characters dot matrix printing
8. Display: 128×64 Chinese characters display

 
Printing: 20 columns Chinese characters dot matrix printing
Display: 128×64 Chinese characters display
Storage mode: Experimental results can be stored in 199 groups of historical data for easy query;
result output: At the same time can be equipped with U disk output function, output to the PC side for long-term storage
output format: The output format of the result USB flash disk is CSV or Excel.
Data extension: laser printer interface, HP1108 laser printer can be linked (optional).
Data protection: with date password setting function.
Standard printing: standard printing for automatic measurement and thermal sensitivity of micro printer
Remote upgrade: Equipped with TCP network transmission function, software remote upgrade can be carried out later
Data management: LimIS system can be connected
Data memory: the memory of microcomputer instrument can be expanded to 16G.