All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
Phone Number :
+8615665870097
WhatsApp :
+8613805402265
Petroleum wax oil content tester (butanone toluene method) with cold and hot two bath integration SH3554
| MODEL: | SH3554 |
|---|---|
| Working Power Supply: | AC220V±10% 50Hz |
| Water Bath Temperature: | Room Temperature ~95℃±0.5℃ |
Aviation turbine fuel actual gum tester (steam injection method) metal bath heating SH8019B
| MODEL: | SH8019B |
|---|---|
| Working Power Supply: | AC220V±10%, 50Hz |
| Evaporation Bath Type, Size: | Aluminum Bath Block Φ260 ㎜×130mm. |
Fully automatic grease oxidation stability tester, automatic oxygenation and automatic printingSH0325B
| MODEL: | SH0325B |
|---|---|
| Power Source: | AC 220V±10% 50Hz |
| Heating Power: | 1500W |
Automatic mechanical impurity content analyzer (with balance) automatically imports weighing data and calculates results
| MODEL: | SH101C |
|---|---|
| Determination Rate: | 0.1℃ |
| Printer: | 58mm Wide Micro Thermal Printer |
Petroleum Products Mechanical Impurities Tester Lab Test Instruments ASTM D473 Additives Mechanical Impurities Tester
| Size: | 510×330×320 (excluding Footpads) |
|---|---|
| Key Words: | ASTM D473 Additives Mechanical Impurities Tester Of Lub Oils |
| Stanard: | ASTM D473 |
Petroleum Oil Additive Mechanical Impurity Tester GOST 6370-1983:1997
| K1: | GOST 6370-1983:1997 |
|---|---|
| Input Voltage: | AC220V±10‰ 50Hz |
| Heating Power: | 200W×2 |
Automatic Rotating Oxygen Bomb Tester Rotating Pressure Vessel Method Astm D2272
| Standard: | ASTM D2272 |
|---|---|
| Name: | RPVOT Rotating Pressure Vessel Method Oxidation Stability Tester Astm D2272 |
| Range For Pressure Sensor: | (0~1.6)MPa,accuracy:±2‰ |
ASTMD942Lubricating grease oxidation stability tester,digital temperature controller, two hole constant temperature bath
| Applicable Standard: | SH/T0325 ASTM D942 |
|---|---|
| Input Voltage: | AC220V±10% 50Hz |
| Temperature Control Range: | Room Temperature -150℃ |
UV Fluorescence Sulfur Meter ASTM D5453 Lab Test Instruments 1000℃
| Determination Range: | 0.1 ~ 10000mg/L (PPM) |
|---|---|
| Lower Detection Limit: | 0.1ppm (sulfur) |
| Repeatability Error: | 1.0mg/L < X≤10mg/L, CV ≤±10% |
Automatic Crude Oil Wax Precipitation Point Tester Glass Transition Temperature
| Name: | Automatic Crude Oil Wax Precipitation Point Tester |
|---|---|
| Standard: | SY/T0545 |
| Temperature Range: | - 40~600 ℃ |