Testing method for flash point of coatings, sampling and sample handling
According to the provisions of the national standard GB 3186-82 "Sampling of coating products", representative coating samples are taken from the coating products to be tested.
Before the test, the sample should be placed in an airtight container, the free volume of the container should not exceed 10% of the total volume of the container.
Samples should not be stored in plastic (such as polyethylene, polypropylene, etc.) bottles.
Paint flash point detection using GB/T5208 flash point determination rapid balance cup method to determine, Shandong Shengtai Instrument Co., Ltd. research and development of SH105D balance method of low temperature closed mouth flash point instrument is in accordance with the People's Republic of China standard GB/T5208 "flash point determination rapid balance closed cup method" requirements of the design and manufacture,
The results can be stored in a microcomputer, but also can be U disk output data saved to the computer.
The instrument also complies with ISO 1523 and ISO 3679 standards.
This instrument is especially suitable for testing the flash point of all kinds of colors, paints, adhesives, solvents, petroleum and related products in the range of -30℃ ~ +100℃.