|Name:||Anti-rust Wet-heat Test Box||Test Depth::||200 Mm|
|Heating And Stabilization Time::||≤30min||Temperature Fluctuation::||≤±0.5℃|
|Humidity Range::||> 95% R.h.||Temperature Sensor::||Double PT100 Platinum Resistance Temperature Sensor|
lubricating oil testing equipment,
lube oil analysis equipment
SH606 anti-rust wet-heat test box is a kind of test equipment simulating the humid environment, which can be used by the laboratories of petroleum, chemical industry, colleges and universities, scientific research institutes and other scientific research institutions to test and evaluate the anti-rust performance of grease on metal.
304 stainless steel plate and (t=1mm) A3 plate are used in the inner tank of the anti-rust grease wet-heat test box. The heating system adopts u-shaped anti-corrosion alloy high-speed heating electric heat pipe. The connecting parts of the inner and outer tank are made of metal high and low temperature materials to effectively reduce the temperature.
Meet the standard: SH/T 0692-2000 appendix A(standard appendix) anti-rust oil -- long-term laminated corrosion test
GB-T2361 test method for heat and moisture of antirust grease
Sht0217-1998 anti-rust grease test sheet corrosion degree
Sht0218-1993 test sheet preparation method for antirust grease test
Gb12981-2012 motor vehicle brake fluid appendix M
The performance characteristics of
1. Temperature/humidity control instrument adopts high precision microcomputer digital display integrated controller
2. Temperature sensor: double PT100 platinum resistance temperature sensor
3. Control mode: thermal balance, temperature and humidity adjustment;
5. Temperature control adopts p. i. D+S.S.R system to coordinate with the channel;
6. The rust-proof grease moisture-heat test box has the function of automatic calculation, which can immediately correct the temperature and humidity changing conditions, so as to make the temperature and humidity control more accurate and stable;
1, temperature range: room temperature -80 degrees arbitrary Settings
2. Humidity range: > 95% r.h.
3. Temperature fluctuation: ≤±0.5℃
4. Test depth: 200 mm
5. Heating and stabilization time: ≤30min
6. Rotating speed of test frame: 1/3 revolution /min
7. Air intake: more than 3 times of fresh air per hour.
8. Interval setting range: 1 ~ 9999 hours
Contact Person: Weisufen