|Model:||SJK60||Standard:||ASTM B-117, B-268 , GB-T2423, GJB 150|
|Inner Box Size:||600 × 450 × 400mm (W * D * H)||Scope Of Application:||Corrosion Resistance|
GJB 150 Salt Spray Test Chamber,
SJK60 Salt Spray Test Chamber
Salt spray test chamber ASTM B-117, B-268 , GB-T2423, GJB 150
1. Salt spray test machine
The SJK60 salt spray test machine is one of the artificial climate environment "three protection" (humid heat, salt spray, mold) test equipment, is to study various environmental adaptability and other industries of machinery, national defense, light industry, electronics, light industry electronics, instrumentation, etc. An important salt spray test equipment for reliability. The salt spray test machine can be used for neutral salt spray test according to GB / T2423.17 "Basic Environmental Test Procedure Test for Electronic and Electrical Products Ka: Salt Spray Test Method", and can also be used for acetate salt spray test.
Features: This salt spray test machine complies with CNS, ASTM, JIS, ISO standards. The salt spray test is to test the resistance of its products after anticorrosion treatment such as coating, electroplating, anode treatment, anti-rust oil, etc. Corrosive.
The full detection system is adopted.
· The whole set is made of imported PVC board, which has strong structure, never deforms, and is resistant to acid, alkali and high temperature and never ages.
· Automatic / manual water adding system is adopted, which can automatically / manually add water when the water level is insufficient, the test is not interrupted, and the water level is insufficient for warning display.
· The mist of the precision glass nozzle diffuses evenly and falls naturally on the test piece, ensuring no crystalline salt obstruction.
· The controllers are all on the same board, easy to operate, and clear at a glance.
· With double temperature protection, warning of insufficient water level to ensure safe use.
· The imported temperature controller has manual and fully automatic control methods, using digital display, PID control, error ± 0.1 ℃, the maximum setting time can reach 999HrS.
· The laboratory adopts the direct heating method of steam, the heating speed is fast and uniform, and the standby time is shortened.
· The spray tower is equipped with a cone-shaped diffuser, which has the functions of guiding the mist, adjusting the amount of mist and evenly falling the mist.
· The pressure barrel adopts Henry's law to heat and humidify, and provide the humidity required by the laboratory.
· The upper cover of the test tank of the enlarged model is automatically opened and closed by the pneumatic cylinder, which is easy to operate and has good safety.
· After the test is completed, it has an automatic defogging device, which can clearly observe the test products in the test room.
· Use standard: CNS3627, 3885, 4159, 7669, 8886, JIS D-0201, H-8502, H-8610, K-5400, Z-2371, ISO 3768, 3769, 3770, ASTM B-117, B-268 , GB-T2423, GJB 150.
Built-in function: Inner box size: 600 × 450 × 400mm (W * D * H)
The salt spray tester is suitable for surface treatment of various materials, including paint, electroplating, organic and inorganic coatings, anode treatment, anti-rust oil and other anti-corrosion treatments to test the corrosion resistance of its products.
Contact Person: Tang