Automatic constant temperature coning meter
Coning degree refers to the standard cone (generally a total load of 150 grams, there are provisions for 100 grams) in 5 seconds into the insulation at 25℃ when the depth of grease sample. The unit is 1/10 of a millimeter. The greater the needle penetration, the softer the grease, that is, the smaller the consistency; On the contrary, the harder the grease is, the greater the consistency. Bitumen penetration is measured by standard needle with a load of 100 grams instead of a standard cone.
SH017 automatic constant temperature cone needle penetration tester is designed and manufactured according to the technical requirements and relevant provisions of GB/T269 and GB/T4509 standards of the People's Republic of China, mainly suitable for grease (or vaseline) cone penetration test. Traffic highway engineering and other industrial sectors can be widely used.
Main technical features and parameters
1. Upgrade to 7-inch TFT color LCD display;
2. Constant temperature refrigeration mode: semiconductor refrigeration.
3. Detection method: high-precision displacement sensor.
4. After the upgrade, 199 groups of historical data can be stored for easy query; The usb disk output function is also optional
5. Standard micro printer automatic measurement automatic printing
6. Data can be output by USB disk
7. Measuring range: 0 ~ 680 coning degree;
8. Resolution: 0.01㎜;
9. Coning accuracy: ±1 coning degree;
10. Standard cone: 102.5±0.05g, in line with the national standard GB/T269 specification requirements
Standard needle :(2.5±0.05) g (optional)
11. Others: Equipped with cold light source, easy to use and operate.
12. Storage mode: 199 groups of historical data can be stored for easy query;
13. Output: It can also be equipped with usb disk output function, output to PC for long-term storage
14. Output format: The output format of the USB flash drive is CSV or Excel.
15. Standard printing: standard micro printer automatic measurement automatic thermal printing