All Products
-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
WhatsApp :
+8615665870097
0.5% closed cup flash point apparatus Line With ISO-2719 ASTM D93 GB261-2008 Standard
Name: | Automatic Closed Flash Point Tester |
---|---|
Working Power Supply: | AC220V±10%, 50Hz |
Temperature Measurement: | Range: Room Temperature ~ 370℃ |
ASTM D892 Foam Tester For Measuring Lubricant'S Foaming Tendency And Stability
MODEL: | SH126 |
---|---|
Power: | AC220V±10% 50Hz |
Temperature Of Baths: | The 24℃±0.5℃ Of Low Temperature The93.℃±0.5℃of High Temperature |
Lab Test Instruments Acid Value Analyzer Potentiometric Titration Equivalent To ASTMD664
Name: | Automatic Acid Value Analyzer |
---|---|
Measurement Range: | 0.05 ~ 0.5mg KOH/g |
Measurement Range: | -2000.0- 2000.0 MV |
Automatic Acid Value Meter By Potentiometric Titration Potential Titration Method Astm D664
Measuring Range: | ≥0.001 MgKOH/G |
---|---|
Potential Community Range: | -2000.0 ~ + 2000.0 MV |
Electronic Unit Basic Error: | 0.1% FS 0.1mV |
Distillation Water Content Tester For Petroleum Products ASTM D95
Standard: | ASTM D95 |
---|---|
Key Words: | Oil Moisture Meter |
Key Words1: | Distillation Water Content Tester |
Low temperature dynamic viscosity of engine oil SH110 fully automatic apparent viscosity tester (CCS)
Temperature Range: | Temperature Control Range Of External Circulating Alcohol Bath Is Normal Temperature ~ -70℃ |
---|---|
Temperature Control Accuracy Of Cold Bath: | ±0.1℃ |
Stator Temperature Control Accuracy: | ±0.05℃ |
Constant Temperature Oil Densitometer (5/10000) GB/T2013-2010 GB/T29617-2013
Density Measurement Range: | 0.0001 -1.9999g/cm³ |
---|---|
Density Measurement Accuracy: | ± 0.0005g /cm3 |
Resolution Of Density Value: | ± 0.005g /cm3 |
Automatic Oil Particle Counter Oil Industry Classic Methods NAS1638 And ISO4406
Light Source: | Semiconductor Laser |
---|---|
Diameter Range: | 0.8um~600um (depending On Different Sensors) |
Detection Channel: | 16 Channels, Arbitrary Particle Size |
Sensory physical property analysis instrument ST-16A can measure hardness, tensile force, strength, pressure, etc
Standard: | GB28304 |
---|---|
Name: | Gel Strength Tester |
Test Range: | (5~200)N |
Fluorescence Spectral Sulfur Analyzer Diesel Fuel Sulfur Tester SH407 Lab Test Instruments
Standard: | ASTMD4294-02 |
---|---|
Sulfur Measurement Range:: | 10ppm ~ 5% |
Sample Size: | (2 ~ 3) ML (equivalent To The Sample Depth Of 3mm ~ 4mm). |