Automatic determination of flash point of lubricating oil
Flash point is an indicator of the evaporability of oil products. The lighter the fraction, the more evaporative and the lower the flash point. Conversely, the heavier the oil fraction, the less evaporation, the flash point is also higher. At the same time, flash point is the indicator of the ignition risk of petroleum products. The danger level of oil is divided according to the flash point. The flash point is flammable below 45℃, and combustible above 45℃. In the process of storage and transportation of oil, it is strictly prohibited to heat oil to its flash point temperature. With the same viscosity, the higher the flash point, the better. Therefore, users should choose lubricating oil according to the temperature and working conditions of lubricating oil. It is generally believed that the flash point is 20~30℃ higher than the operating temperature, which can be used safely.
SH106B automatic open flash point tester is designed and manufactured according to the requirements specified in GB/T 3536 "Petroleum Products Flash point and Flash point Determination (Cleveland open cup Method)" of the People's Republic of China. The instrument according to the standard method of heating, automatic lifting, automatic ventilation, automatic ignition, automatic display, automatic locking flash point value, automatic printing results. After the test, it can be cooled automatically, and the working process is fully automated. It has the advantages of accurate measurement, good repeatability, stable performance and simple operation. Widely used in power, petroleum, chemical, commodity inspection, scientific research and other departments. In line with ISO-2719,GB3536 standards.