-
Petroleum Testing Instruments
-
Lubricating Oil And Grease Antifreeze Testing Instruments
-
Diesel Fuel Testing Equipment
-
Transformer Oil Testing Equipment
-
Feed Testing Instrument
-
Pharmaceutical Testing Instruments
-
Edible Oil Testing Equipment
-
Chemical Analysis Instruments
-
Lube Oil Testing Equipment
-
Flour Test Instrument
-
Food Testing Instruments
-
Crude Oil Testing Equipment
-
Hydraulic Oil Testing Equipment
-
Flash Point Tester
-
Kinematic Viscosity Tester
-
Freezing Point Tester
-
Cone Penetration Apparatus
Crude Oil Testing Equipment SH6532 Single hole crude oil salt content tester
Contact me for free samples and coupons.
WhatsApp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xMODEL | SH6532 | Working Power Supply | AC (220V ± 10V), 50Hz. |
---|---|---|---|
Extractor Heating Power | 300W × 2 | Remark | The Customer Provides Magnetic Stirrer And Potentiometric Titration Instrument |
High Light | soil hardness tester,soil testing laboratory equipment |
The crude oil salt content analyzer extractor is suitable for measuring the total amount of halides in crude oil, topped crude oil, cracking residue, and fuel oil with a concentration of 0.002~0.02% by weight. It can also be used to determine the contamination of used turbine oil and marine fuel oil by seawater. When the required precision is not greater than the range specified in this method, it can also be used for other products.
The SH6532 crude oil salt content analyzer extractor is designed and manufactured in accordance with the requirements specified in the Chinese standard GB/T6532 "Salt Content Determination Method for Crude Oil and Its Products".
Main structure of the instrument
(1) Extractor: consisting of a flask and a heating part, with a flask volume of 500ml; The heating part is composed of electric heating wires wound around the lower end.
⑵ Column shaped drip funnel: used to add reagents such as hot toluene, anhydrous ethanol, acetone, and perform quantitative separation.
(3) Condenser: It has a condensing effect on the distilled gas.
(4) Temperature adjustment knob: used to heat the test solution that needs to be heated.
⑸ separatory funnel piston: the control piston of the extractor to discharge the solution.
(6) Triangular flask: A ground triangular flask used to receive the solution discharged from the flask.
(7) Aviation plug: Extractor heating wire working power plug
Main technical parameters and indicators
1. Extractor: Comply with the specifications and dimensions of glassware in the GB/T6532 standard;
2. Extractor heating power: 300W × 2;
3. Working power supply: AC (220V ± 10V), 50Hz.
Remark: the customer provides magnetic stirrer and potentiometric titration instrument
Packaging size: 550 ×400× 380mm, weighing approximately 12kg
Structural characteristics
The instrument is mainly composed of an extractor (extractor) flask, a heating coil, a protective cover, a condenser, a cylindrical separatory funnel (drip funnel), a clamping device, a digital display adjustable temperature control board, a pole support, a pole, a double top wire, a universal clamp, a conical flask, etc. The structure is shown in the left figure:
1. Condenser 9, power switch
2. Universal clamp 10, power cord
3. Dropping funnel 11, voltage adjustment knob
4. Clamping device 12. Digital display voltmeter
5. Extractor flask 13, power indicator light
6. Protective cover 14, upright bracket
7. Aerial plug 15, double top wire
8. Heating coil 16, vertical pole
PACKING LIST
S/N | Name | Quantity | Unit | Remarks |
1 | Salt content tester for crude oil and its products | 1 | set | |
2 | Extractor | 1 | set | |
|
1 | piece | ||
|
1 | piece | ||
|
1 | piece | ||
3 | Grinding triangular flask (with lid) | 1 | piece |
OUR service
After-sales service commitment, our company to sell the product after-sales service commitment: warranty period of one year, long-term technical support outside the warranty period. During the warranty period, the seller shall bear the cost of the replacement of the equipment, the freight and maintenance of the instrument; outside the warranty period, the seller shall waive the maintenance fee and charge only the cost of the basic materials and freight charges when the instrument is malfunctioning and the seller shall not charge the maintenance fee during the warranty period.
Packaging & Delivery
1. Out packing: Standard export wooden case.
2. Inner packing: With careful stretch film wrap product, hard wood board+ strong bandage to fix corners.
3. Checking teams: Specialized staff to inspect and classified your goods.
4.Port Any port of China
Lead Time :
Quantity(Sets) | 1 - 1 | 2 - 5 | 6 - 10 | >10 |
Est. Time(days) | 6 | 20 | 30 | To be negotiated |
Contact us
Shandong Shengtai Instrument Co.,ltd
ADD:6-8 time base NO.15 lanxiang road tianqiao Area Jinan city
TEL:+86 0531-85919987 85929987
FAX:+86 0531-85957987
Whatsapp/facebook:+86 13370527859
QQ:3206156217
Email:3206156217@qq.com
Web:www.labtool.net/en